01
Transformer Tanks
Oil-cooled tanks, welded leak-tight and pressure-tested to IS before they go near paint.
SEC · 00 / Heavy Fabrication · Chennai · ISO 9001:2015Seamless fabrication.
Seamless fabrication.
Send the drawing. We deliver the finished part.
Enjoy single-source accountability. Cutting, forming, welding, testing and assembly are handled in-house at our Thirumudivakkam works; specialized machining and coating go to long-term partners nearby. Your procurement streamlines into one PO for complete, fully documented assemblies — and if a timeline moves, you hear it from us first.
SCE-DMP-014 · Multi-louver damper
Who we build for
Schwing StetterFives-Cail KCPBenco ThermalIPL ProductsDyrocon AirtechBolroochi DampersTotal Heat Treatment
SEC · 01 / The Process
Eight stages. One owner.
Plenty of shops will cut and bend for you, then wish you luck with the machining. We stay on the job until it's coated and delivered. The core stages run on our own floor; specialized machining and finishing go through partners we work with every week — under our supervision, on our PO.
01
RFQ & Planning
In-houseFast, transparent quoting and technical review directly by our engineering team.
02
Flexible Material Sourcing
In-house & PartnerFree-Issue Material: supply your own plates and structural profiles. Turnkey Procurement: leverage our bulk supplier network with advance payment to secure competitive material rates.
03
Precision Cutting
In-houseVersatile cutting methods matched to material type, thickness and tolerance: Laser Cutting (Mild Steel up to 16 mm; Stainless Steel up to 10 mm), Plasma Cutting (Mild Steel up to 50 mm; Stainless Steel up to 25 mm), Oxy-Fuel / Gas Cutting (Mild Steel up to 250 mm).
04
Forming & Bending
In-house & PartnerCNC Press Brake (In-House): high-precision bending with 320-Ton capacity across 4-meter lengths. Plate & Structural Rolling (Partner Network): heavy plate and section rolling managed seamlessly under our quality supervision.
05
Fabrication & Assembly
In-houseMedium to heavy structural and industrial fabrication by our skilled workforce: qualified fitters experienced in complex layouts, tight tolerances and heavy assembly; certified welders skilled in GMAW (MIG) and SMAW (ARC) for high-integrity, leak-proof structural welds; meticulous finishing, grinding, weld-seam dressing and beveling.
06
Precision Machining
Partner · CoordinatedComprehensive machining, from small precision components to heavy industrial structures, executed via our trusted machining partners under strict quality inspection.
07
Surface Treatment & Coating
Partner · CoordinatedEnd-to-end finishing solutions: industrial painting, hot-dip galvanizing, electroplating and powder coating tailored to your exact corrosion protection and aesthetic specifications.
08
Logistics & Delivery
In-house & PartnerIn-House Logistics: dedicated fleet handling up to 5-Ton capacity for medium-sized loads and rapid local movement. Heavy Freight Partners: long-haul and heavy-lift transport ensuring safe, undamaged delivery for oversized components.
Done on our floor, ThirumudivakkamPartner shop in the same estate. We manage it, we answer for it
SEC · 02 / The Alternative
You already know how the three-vendor route goes.
The cutting shop finishes on time, the machinist sits on it for a fortnight, and when the flanges don't mate, each one swears the drawing was right when it left their floor. Meanwhile the docs you need for your audit are scattered across four WhatsApp threads.
Someone in your office ends up project-managing suppliers instead of doing their actual job. We started SCE because that someone shouldn't be you.
✕ Split across three or four shops
The usual way of doing it.
- A PO and a follow-up list for every shop
- Flanges that don't mate at assembly
- QC docs chased out of each vendor separately
- One slips, the shipment slips, everyone shrugs
✓ With SCE holding the job
How your order runs here.
- You raise one PO; we manage the rest
- Fit checked at each stage, not discovered at the end
- The full doc folder arrives with the dispatch
- If something moves, you hear it from us first
SEC · 03 / What We Build
What leaves the gate.
Dampers and transformer tanks are the bread and butter. The rest is whatever heavy mild-steel work the drawing calls for.
02
Multi-Louver Dampers
Boiler intake, AHU and process-air work. This is the bulk of what leaves our gate. Some weeks it's all we build.
03
Industrial Furnace
Shells, frames and internals for heat-treatment and thermal-process lines.
04
Heavy Equipment
Skid bases, supports and weldments that machinery sits on for the next twenty years.
05
Structural Fabrication
Frames, sections and assemblies for heavy machinery builders. Send the GA drawing, we'll take it from there.
06
Base Frames
Precision-fabricated base frames and skids, machined flat and drilled to your equipment's mounting pattern.
07
Custom Component Fabrication
Heavy, mild steel, drawn to spec? That's the whole brief. Send us your drawings and we'll build category seven together.
SEC · 04 / Equipment
What's on the floor, and what's a phone call away.
Everything that decides fit and tolerance happens on our machines. The finishing trades are partner shops in the same estate, close enough that our driver can chase them, so you don't have to.
| Capability | Resource | Status |
|---|---|---|
| Laser cutting | CNC laser for profile work | In-house |
| Plasma & oxyfuel cutting | Messer plasma and oxyfuel sets for heavy plate | In-house |
| Press-brake forming | DENER Smart XL · 320T × 4000mm | In-house |
| Welding & pressure testing | Certified welders; dye-pen, leak and pressure tests to IS | In-house |
| Machining (toleranced features) | Partner shops in the same industrial estate | Partner · Coordinated |
| Surface treatment | Paint, galvanising and powder-coat partners we use every week | Partner · Coordinated |
016+ yrsBuilding heavy mild-steel workFounded · 2019
02200T/moFabricated tonnage through the shopOur floor + partner shops
031POPlate in, painted component outOne schedule · one warranty
04ISO9001:2015 certified · IS compliantCerts ship with the job
SEC · 05 / Repeat Orders
Why the second PO arrives.
Ask the procurement leads who've placed a repeat order with us and it usually comes down to these three.
01
The date we quote is the date we ship
We're not the cheapest shop in Chennai. We're the one that answers the phone in week 8 and still hits the date we gave you in week 1.
02
Paperwork your QC will accept
Mill certs, WPS, dye-pen and pressure-test reports, compiled as the job runs, not scrambled together the night before dispatch.
03
You talk to the person running the job
Call the works and you get Vinodh or the production lead. The person who answers is the person who can actually move your job.
SEC · 06 / Questions
Asked before the first PO, usually.
What's your typical turnaround from RFQ to quote?
One working day for most jobs: feasibility, lead time and price in the same reply. If the job needs tooling we don't have or a finish we haven't done before, it takes longer, and we'll tell you that in the first mail instead of discovering it together in week six.
What materials do you fabricate?
Mild steel, mostly IS 2062 E250 and equivalents. Heavy plate is our daily work: tank walls, damper frames, structural sections. If you're specifying something unusual, send the drawing over and we'll tell you honestly whether it's our kind of job or not.
Do you handle QC documentation?
Yes, and it's not an afterthought. Mill certs get filed when the plate arrives, weld records as the joints close, pressure-test reports before paint. The full package goes in the dispatch folder. If your auditors want a specific format, name it in the RFQ.
Where does the partner-network work happen?
The machining shops and the galvanisers we use are in the same estate, twenty minutes from our gate. We've worked with them for years. But that's our problem to manage, not yours. You raise one PO, the invoice comes from us, and if the machining is late it's us you call, not a shop you've never heard of.
What's your monthly capacity?
About 200 tonnes through the floor and the partner shops combined. What that means for your order depends on the mix. A 20-tonne tank job is not the same as 20 tonnes of small brackets. Ask before you commit and we'll give you a real date, not a hopeful one.
Do you take one-off orders, or only repeat production?
Both. A fair share of our work is single drawings that never repeat. The process doesn't change: same quote discipline, same docs, same test routine whether it's one piece or five hundred.
SEC · 07 / Start Here
Got a drawing on your desk? Send it over.
Feasibility, lead time and a price, back within one working day. If it's not our kind of job, we'll say that too.
Direct Contact
A. Vinodh Pandian
Managing Director
- Phone
- +91 91764 55616
- Vinodh.sce@gmail.com
- Base
- Thirumudivakkam, Chennai